ECHOGEAR
EGLF2 Full Motion TV Wall Mount
TV mount
From
$114.99
MantelMount MM540 Enhanced Pull Down TV Mount
A pull-down mount that lowers a 44 to 80 inch TV 27 inches from above the fireplace to eye level.
Where to buy
Also check
Prices change. Each shows when it was last checked. We may earn a commission when you buy through these links; it never affects what we recommend. Amazon prices are not displayed.
The verdict
A fitting choice for a TV hung high over a mantel that you want at eye level while watching. The stated weight window of 20 to 90 lb matters, because very light TVs may not balance on the gas springs. Mounting needs a structural surface such as studs, brick or stone.
The MM540 is MantelMount's mid-range pull-down mount for TVs above a fireplace. A gas-spring arm lowers the TV 27 inches to eye level, with 30 degrees of swivel each way and up to 9 degrees of downward tilt. It is specified for 44 to 80 inch TVs weighing 20 to 90 lb, with VESA patterns from 200 x 200 to 600 x 600 mm. It clears mantels up to 18 inches deep and includes a soundbar attachment and heat-sensing pull handles.
Strengths
- Lowers the TV 27 inches and swivels 30 degrees either way.
- Built-in soundbar attachment and heat-sensing pull handles.
- Clears mantels up to 18 inches deep.
- Limited lifetime warranty, with 5 years on the gas springs.
Weak spots
- Weight window of 20 to 90 lb; the maker says very light TVs can cause the arm to bounce up.
- Sits 5.7 inches from the wall unless an optional recess box is added.
- Must be fastened to something structural, not drywall alone.
Great for
- Above-fireplace installs where the TV hangs high
- TVs between 44 and 80 inches within the 20 to 90 lb window
Skip if
- Very light or very heavy TVs outside the weight window
- Mantels deeper than 18 inches without a horizontal adapter
Full specifications
From the manufacturer unless noted. Shown for this model.
Fit
- Mount typeFixed mounts sit flattest. Tilting helps with glare. Full-motion lets you aim the TV at different seats. Pull-down mounts bring a high TV down to eye level.
- Pull-down
- Smallest VESA width
- 200 mm
- Smallest VESA height
- 200 mm
- Largest VESA widthVESA is the screw-hole pattern on the back of a TV. The mount’s range must include your TV’s pattern.
- 600 mm
- Largest VESA height
- 600 mm
- Weight capacity
- 40.8 kg
- Smallest TV size
- 44 in
- Largest TV size
- 80 in
Install
- Wall types
- Wood stud, Brick
- Stud spacing
- Reaches studs up to 24 in apart
Motion
- Depth from wall (closest)
- 144.8 mm
- Tilt range
- 9 degrees downward
- Swivel range
- 30 degrees left or right
Warranty
- Warranty
- Limited lifetime warranty; gas springs carry a 5-year warranty
Primary source: mantelmount.com
Setup notes
- TV weight, including any soundbar, must fall between 20 and 90 lb.
- Supported VESA patterns range from 200 x 200 to 600 x 600 mm.
- The optional RB100 recess box and SSB40 adapter are needed to recess the mount, per the maker.
Questions
How far does the MM540 pull down?
MantelMount lists 27 inches of vertical drop, with 30 degrees of swivel to each side and up to 9 degrees of downward tilt.
What TVs does the MM540 support?
It is specified for TVs from 44 to 80 inches and 20 to 90 lb, with VESA patterns from 200 x 200 to 600 x 600 mm.
How deep a mantel can the MM540 clear?
The maker gives a maximum clearance of 18 inches for the mantel, measured from the wall.
More tv mounts
Sources for this page
Last reviewed Nov 9, 2026. Spotted an error? Tell us.