ECHOGEAR
EGLF2 Full Motion TV Wall Mount
TV mount
From
$114.99
ECHOGEAR EGLF3 Full Motion TV Wall Mount
A dual-arm full-motion mount for 43 to 82 inch TVs that extends 19 inches and swivels 140 degrees.
Where to buy
Also check
Prices change. Each shows when it was last checked. We may earn a commission when you buy through these links; it never affects what we recommend. Amazon prices are not displayed.
The verdict
A solid option for a mid-to-large TV that needs to turn toward the seating. It is rated lower than the EGLF2 for weight and size, and it is aimed at 16 inch stud spacing, so check both before buying.
The EGLF3 is a dual-arm full-motion mount from ECHOGEAR for 43 to 82 inch TVs up to 110 lb. It extends 19 inches from the wall, swivels 140 degrees, tilts 15 degrees down and 5 degrees up, and can shift 5.4 inches left or right for centering. It fits VESA patterns from 200 x 100 to 600 x 400 mm, with cable routing through the arm and post-install leveling of 3 degrees. It is designed for 16 inch studs.
Strengths
- Swivels 140 degrees and extends 19 inches from the wall.
- Slides 5.4 inches sideways to center the TV on off-center studs.
- Cable routing through the arm and included cable clips.
- Can be leveled by 3 degrees after the TV is hung.
Weak spots
- Rated for 110 lb and 82 inches, below the maker's EGLF2.
- Designed for 16 inch studs; wider spacing needs a different mount or an extension bracket.
- Sits 2.9 inches from the wall when folded.
Great for
- Mid-to-large TVs that must angle toward off-axis seating
- Walls with 16 inch stud spacing
Skip if
- TVs heavier than 110 lb or larger than 82 inches
- Walls with studs wider than 17 inches
Full specifications
From the manufacturer unless noted. Shown for this model.
Fit
- Mount typeFixed mounts sit flattest. Tilting helps with glare. Full-motion lets you aim the TV at different seats. Pull-down mounts bring a high TV down to eye level.
- Full-motion
- Smallest VESA width
- 200 mm
- Smallest VESA height
- 100 mm
- Largest VESA widthVESA is the screw-hole pattern on the back of a TV. The mount’s range must include your TV’s pattern.
- 600 mm
- Largest VESA height
- 400 mm
- Weight capacity
- 49.9 kg
- Smallest TV size
- 43 in
- Largest TV size
- 82 in
Install
- Stud spacing
- 16 in to 17 in studs
- Post-install leveling
- Yes
- Cable management
- Through-arm routing and two cable clips
Motion
- Depth from wall (closest)
- 73.7 mm
- Maximum extension
- 482.6 mm
- Tilt range
- 15 degrees down, 5 degrees up
- Swivel range
- 140 degrees
Primary source: echogear.com
Setup notes
- Compatible VESA patterns run from 200 x 100 to 600 x 400 mm, including 500 x 400 mm.
- Compatible stud width is listed as 16 to 17 inches.
Questions
How far does the EGLF3 extend?
ECHOGEAR lists a 19 inch extension and a 2.9 inch depth when folded against the wall.
What weight does the EGLF3 support?
The maker gives 110 lb, about 49.9 kg, for TVs from 43 to 82 inches.
Does the EGLF3 fit 24 inch studs?
The page lists a compatible stud width of 16 to 17 inches and points to the EGLF2 for wider spacing.
More tv mounts
Sources for this page
Last reviewed Nov 9, 2026. Spotted an error? Tell us.