Features and Installation Demo of Mounting Dream Full Motion TV Wall Mount MD2393-MX
Mounting Dream's own demonstration of the MD2393-MX's features and how it is installed.
Image pending
Mounting Dream MD2393-MX Full Motion TV Wall Mount
A low-cost single-stud full-motion mount for 26 to 55 inch TVs up to 77 lb, with tilt, swivel and post-install leveling.
Where to buy
Also check
Prices change. Each shows when it was last checked. We may earn a commission when you buy through these links; it never affects what we recommend. Amazon prices are not displayed.
The verdict
A sensible budget way to put a small or mid-size TV on an articulating arm, especially where only one stud sits in the right place. The 55 inch and 77 lb limits rule out most large TVs, and Mounting Dream does not publish the swivel angle, so make sure the sideways reach suits your seating.
The MD2393-MX is a basic full-motion wall mount from Mounting Dream for most 26 to 55 inch TVs weighing up to 77 lb. It fits VESA patterns from 75 x 75 to 400 x 400 mm, can be fixed to a single wood stud, concrete or brick, and moves the TV from 2.7 inches to 16.7 inches off the wall. The TV tilts 5 degrees up and 15 degrees down, swivels left and right, and can be leveled by up to 4 degrees after installation. Mounting hardware is included and Mounting Dream offers a lifetime warranty.
Strengths
- Fits a wide range of mounting patterns, from 75 x 75 to 400 x 400 mm.
- Can be fixed to a single wood stud, concrete or brick, which helps where studs are awkwardly placed.
- Allows up to 4 degrees of leveling after the TV is hung.
- Reaches 16.7 inches from the wall and folds back to 2.7 inches.
- Mounting Dream offers a lifetime warranty and includes the mounting hardware.
Weak spots
- Limited to TVs from 26 to 55 inches weighing no more than 77 lb.
- Mounting Dream does not state how many degrees it swivels.
- Only wood stud, concrete and brick walls are listed as suitable.
Great for
- Small and mid-size TVs up to 55 inches
- Walls where only one stud is in the right spot
Skip if
- TVs larger than 55 inches or heavier than 77 lb
Full specifications
From the manufacturer unless noted. Shown for this model.
Fit
- Mount typeFixed mounts sit flattest. Tilting helps with glare. Full-motion lets you aim the TV at different seats. Pull-down mounts bring a high TV down to eye level.
- Full-motion
- Smallest VESA width
- 75 mm
- Smallest VESA height
- 75 mm
- Largest VESA widthVESA is the screw-hole pattern on the back of a TV. The mount’s range must include your TV’s pattern.
- 400 mm
- Largest VESA height
- 400 mm
- Weight capacity
- 34.9 kg
- Smallest TV size
- 26 in
- Largest TV size
- 55 in
Install
- Wall types
- Wood stud, Concrete, Brick
- Stud spacing
- Mounts on a single wood stud
- Post-install leveling
- Yes
Motion
- Depth from wall (closest)
- 68.6 mm
- Maximum extension
- 424.2 mm
- Tilt range
- 5 degrees up, 15 degrees down
Warranty
- Warranty
- Lifetime warranty
Primary source: mountingdream.com
Setup notes
- Check that the TV's VESA pattern is between 75 x 75 and 400 x 400 mm and that the TV weighs 77 lb or less.
- Mounting Dream lists single wood stud, concrete and brick walls as suitable.
- Leveling can be adjusted by up to 4 degrees either way after the TV is mounted.
- Tilt range is 5 degrees up and 15 degrees down.
Video reviews
Each video was checked to exist and to be about the Mounting Dream MD2393-MX Full Motion TV Wall Mount.
Questions
What size TV fits the Mounting Dream MD2393-MX?
Mounting Dream lists it for most 26 to 55 inch TVs weighing up to 77 lb, about 34.9 kg, with VESA patterns from 75 x 75 to 400 x 400 mm.
Does the MD2393-MX need two wall studs?
No. Mounting Dream says it suits a single wood stud, as well as concrete and brick walls.
How far does the MD2393-MX extend from the wall?
It reaches 16.7 inches from the wall and folds back to 2.7 inches, according to Mounting Dream.
More tv mounts
Sources for this page
Last reviewed Nov 10, 2026. Spotted an error? Tell us.