Belkin
Connect Ultra High-Speed HDMI Cable (8K)
HDMI cable
From
$16.99
Zeskit MAYA Ultra High Speed HDMI Cable (48 Gbps)
A low-cost 48 Gbps HDMI 2.1 cable sold in eight lengths, but the maker's page never states official certification.
Choose a version
Where to buy
Also check
Prices change. Each shows when it was last checked. We may earn a commission when you buy through these links; it never affects what we recommend. Amazon prices are not displayed.
The verdict
A reasonable budget pick for a console or PC connected to an HDMI 2.1 TV, particularly in the shorter lengths. Because the page makes a 48 Gbps claim without naming official certification, we list it as an uncertified claim; buyers who want the certified label should look for the hologram on the packaging or a maker that states it.
The MAYA Ultra High Speed cable is Zeskit's HDMI 2.1 cable for 4K at 120 Hz and 8K at 60 Hz. The maker lists 48 Gbps bandwidth, eARC, ALLM, VRR, QMS, QFT, HDR10, Dolby Vision and HDCP 2.3, in lengths from 0.5 m to 7 m. The 4 m, 5 m and 7 m lengths are marked CL3 for in-wall use. The product page says the cables comply with demanding specifications but does not say they carry the official HDMI Ultra High Speed certification.
Strengths
- States 48 Gbps bandwidth with 4K at 120 Hz and 8K at 60 Hz support.
- Lists eARC, ALLM, VRR, QMS and QFT among supported HDMI 2.1 features.
- Comes in eight lengths from 0.5 m to 7 m, including CL3 in-wall rated lengths at 4 m and above.
- Lists Dolby Vision, HDR10, Dolby Atmos and DTS:X passthrough support.
Weak spots
- The page does not say the cable is officially certified Ultra High Speed, so the 48 Gbps figure is the maker's claim.
- No warranty terms appear on the product page.
- Only the longest three lengths carry the CL3 in-wall rating.
Great for
- Short runs between a console or streamer and an HDMI 2.1 TV
- Shoppers who want a low-cost 48 Gbps cable and accept an uncertified claim
Skip if
- Anyone who needs a cable with a visible official certification label
- Runs beyond 7 m, where an optical cable is the safer choice
Full specifications
From the manufacturer unless noted. Shown for this model.
Performance
- Certification / standardUltra High Speed is the official HDMI label for the full 48 Gbps needed for 4K120 and above. Look for the HDMI certification hologram.
- Uncertified 48 Gbps claim
- Bandwidth
- 48 Gbps
- Active / fiberBeyond a few meters, passive copper cables struggle at 48 Gbps. Active and fiber cables work at longer lengths but are usually one-directional, so check which end goes to the display.
- No
- Directional
- No
- eARC support
- Supports eARC (listed by the maker)
Build
- In-wall rating
- CL3 on the 4 m, 5 m and 7 m lengths only
- Connectors
- HDMI male to male
Primary source: zeskit.com
Setup notes
- For 4K at 120 Hz or 8K at 60 Hz, the TV, source and every port in the chain must also support HDMI 2.1.
- Zeskit also sells a separate Optical Fiber Ultra High Speed cable for longer runs.
Questions
Is the Zeskit MAYA cable officially certified Ultra High Speed?
The product page names the cable Ultra High Speed and lists 48 Gbps bandwidth, but it never states official HDMI certification. We therefore list it as an uncertified 48 Gbps claim.
Which lengths are rated for in-wall use?
The maker marks the 4 m, 5 m and 7 m lengths as CL3. The shorter lengths carry no such marking on the page.
More hdmi cables
Sources for this page
Last reviewed Nov 9, 2026. Spotted an error? Tell us.