KEF Q3 Meta

A compact two-way bookshelf speaker built around KEF's Uni-Q driver, aimed at stereo and home theater use.

Where to buy

KEFChecked Nov 9, 2026$899.99

Also check

Amazon Best Buy Walmart Crutchfield B&H Photo

Prices change. Each shows when it was last checked. We may earn a commission when you buy through these links; it never affects what we recommend. Amazon prices are not displayed.

The verdict

On the maker's data this is a sensible mid-size standmount for small to medium rooms, with a stated 87 dB sensitivity and a recommended 15 to 150 watts per channel. No independent review of this exact model was read for this entry, so sound quality claims here come from KEF only. Check a review before buying if tonal balance matters to you.

The Q3 Meta is the mid-size bookshelf model in KEF's current eight-model Q Series. It uses a 6.5-inch Uni-Q driver array with Metamaterial Absorption Technology, which KEF says soaks up unwanted sound from behind the tweeter. KEF sells it as a pair in black, white or walnut. It suits listeners who want a compact stereo pair that can also serve as front or surround speakers. KEF lists a 4 ohm nominal impedance, so it is best paired with a capable amplifier or receiver.

Strengths

Uses a 6.5-inch Uni-Q driver array, which KEF says spreads sound evenly across the room.
KEF lists a frequency response of 49Hz to 20kHz (plus or minus 3dB) and a typical in-room bass response down to 39Hz.
Magnetic grilles, rubber feet and port bungs are included for placement near a wall.
Can be wall mounted with KEF's B2 bracket or placed on its SQ1 floor stands.

Weak spots

Nominal impedance is 4 ohms (minimum 3.2 ohms), so very weak amplifiers may struggle.
No independent review of this model was read for this entry.
Wiring is conventional passive speaker cable, so an amplifier or AV receiver is required.

Great for

Small to medium rooms that want a compact stereo pair
Home theater front or surround duty alongside other Q Series speakers

Skip if

Buyers who want built-in amplification or streaming

Full specifications

From the manufacturer unless noted. Shown for this model.

Show unpublished specs

Sound

Type: Bookshelf
Sold as: Pair
Nominal impedance: 4 Ω
Sensitivity: 87 dB
Low-frequency extension: 49 Hz
High-frequency extension: 20,000 Hz
Recommended amplifier power: 15-150 W
Powered (built-in amplifier): No

Size & placement

Width: 210 mm
Height: 357 mm
Depth: 305 mm
Weight: 8.2 kg

Primary source: us.kef.com

Setup notes

Passive speaker: needs an external stereo amplifier or AV receiver.
KEF recommends 15 to 150 watts per channel.

Questions

Is the KEF Q3 Meta sold as a single speaker or a pair?

KEF sells it as a pair. Its listing is priced per pair and the box contents list a pair plus grilles, rubber feet, port bungs and a manual.

Can the Q3 Meta be wall mounted?

Yes. KEF says it can be mounted with its B2 Wall Bracket, which screws to the back of the speaker. It can also sit on SQ1 floor stands.

What amplifier power does it need?

KEF recommends 15 to 150 watts per channel. The nominal impedance is 4 ohms with a 3.2 ohm minimum, so choose an amplifier comfortable with that load.